StorageTek 9840 Bedienungsanleitung PDF herunterladen (Seite 194)

Drive Operations Menu

6-38 Sixth Edition 95741

Build Media Information Region (MIR)

Build MIR The 9840 tape drive uses

information recorded at the

beginning of each tape, in an

area known as the Media

Information Region (MIR), to

access and manage that tape

while mounted on the drive.

Make sure drive is unloaded

before activating Build MIR.

Rebuild MIR flashes on the

operator panel while the MIR is

rebuilding.

A 9840 MIR rebuild takes

approximately 40 minutes for a

full tape.

If BldMIRFail (Build MIR

Fail) or CHK xxxx displays,

refer to Table 7-2 on page 7-3

for instructions.

1. Press

Menu to bypass, or

2. Press

Select to activate.

3. When Ld Cust Tp displays,

insert tape requiring MIR.

4. If using a CSL to build the MIR on a

tape, press the

Start switch to load

the tape after inserting it into the

feed channel.

5. When the MIR is rebuilt, and the

tape ejects, insert another tape, or

press

Menu to advance to the Exit

Drive Submenu.

Table 6-3. Menu Table—Drive Operations (Continued)

Options Notes Procedure

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 249 250

Keine Kommentare

StorageTek 9840 Bedienungsanleitung Seite 194